Web Admin interface of the TP-Link AC1200 Archer C64 Wi-Fi Router.

Описание

Web Admin interface of the TP-Link AC1200 Archer C64 wireless Router / gateway.
Shows the router, its lights, ports, power supply and plugs.
And an in depth look through the web configuration interface. This video might be helpful for someone who has to talk someone else through changing settings. A bookmark of the various sections is below.

00:00:56 - Manual.
00:01:28 - Antennas / Aerials.
00:02:20 - PSU.
00:02:48 - Underneath of router.
00:03:04 - Back of router showing power, WAN, LAN ports and WPS / reset button.
00:03:20 - Front of router showing status lights / LEDs.
00:03:45 - Plugging the router in and turning it on.
00:04:34 - Plugging in an internet connection / WAN cable.
00:05:14 - Logging in to the routers default IP admin pages.
00:05:33 - Setting a password and the setup wizard.
00:09:25 - The routers status page / home screen showing internet and LAN status.
00:10:40 - Basic internet / WAN settings.
00:11:52 - Basic WiFi Wireless settings.
00:13:10 - Firmware update and applying a firmware update.
Advanced Settings:
00:17:21 - Operation Mode (Router mode or Access Point mode).
00:17:43 - Network - Status page.
00:18:06 - Advanced internet / WAN settings. (L2TP, PPPoE, Static, PPTP, MTU setting etc.)
00:18:54 - LAN settings (Change the LAN IP range).
00:19:43 - DHCP server settings.
00:20:10 - Dynamic DNS / DDNS settings (no-ip and dyndns).
00:20:27 - Static and Dynamic IP routes.
00:20:45 - TP Link ID setup.
00:21:00 - Wifi Wireless Settings (SSID, Channel Width, Channel etc.)
00:22:04 - Guest WiFi settings.
00:22:12 - WiFi schedule settings.
00:22:25 - WPS.
00:22:37 - Misc WiFi settings (Short GI, WMM, AP Isolation, Airtime Fairness, Beacon Interval, RTS Threshold, DTIM Interval, Group Key Update Period).
00:22:49 - WDS options.
00:23:11 - OneMesh settings.
00:23:37 - Port Forwarding.
00:24:32 - UPnP (Universal Plug and Play).
00:25:04 - DMZ.
00:25:41 - Parental Controls (how to block a website or host name).
00:26:56 - QoS (Quality of Service).
00:27:09 - NAT, NAT Boost and Port Negotiation Speed settings.
00:30:25 - Security / Firewall settings. Enable "Respond to pings from WAN" etc.
00:31:25 - ALG (Application Layer Gateway) settings. (SIP ALG is on and can't be turned off but an option to turn it off appears on firmware 1.12.0 and newer but turning it off appears to leave 5060 still reaching phone systems!).
00:31:43 - IPv6 Settings.
00:32:27 - Backup and restore router settings.
00:32:37 - Admin settings (change admin password, restrict local management, enable WAN management.).
00:33:03 - System Log.
00:33:15 - CWMP / TR-069 settings.
00:33:46 - Ping and traceroute diagnostics.
00:33:59 - Remote and scheduled reboot.
00:34:13 - LED control or schedule (night mode).

How to factory reset the router: https://youtu.be/WuGcJgGkDy0