Jeep Commander power steering pump replacement

Описание

Jeep Commander power steering pump replacement
after installation you MUST bleed the system, Jack up the front end and with the engine OFF turn the wheel all the way back and forth with the power steering fill cap off, this will burp out all the air, do this 40 times for best results, you will see the fluid level lower, add more and the noise, air and bubbles will go away, be careful with the tank and pulley for they are PLASTIC, if you don't feel good about doing your own mechanic work always price around, this job should cost no more then $250, check your idler pulleys while your belt is off by spinning them, they should spin freely, if any small grinding replace them for they will leave you stranded, you can grease them now also, look at your belt where it goes backwards around the fan, if you see small cracks replace. Invent On'