Mastercam 2020 │ EN MARCHA │ INSTALACIÓN

Описание

1. Descargar

Link parte 1:
https://fs1.boostfiles.net/935a253dd5962047?download_token=fa9ce456732154b3383d5fb010c4fcf31c8b5cb2404d5f265a66aa296b9c70dd

Link parte 2:
https://fs1.boostfiles.net/d48cde4baddb551f?download_token=b683e3c299b87688dd4189562af42f3f52d5eb4cb44458805728332a57a4dc31

2. Instrucciones de Instalación:

1. Install Mastercam 2020. Do not start Mastercam!

2. Install MultiKey_18.1.1_x64 for Windows test mode

To do it:

2.1. Uninstall Multikey 18.1 Win64 (if exist)

2.2. Run REGEDIT and remove HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey (if exist)

2.3. Copy folder "MultiKey_18.1.1_x64_24032019_testmode" on computer

2.4. Run "MultiKey_18.1.1_x64_24032019_testmode\MasterCAM_TEST_185221_hasp_dealer.reg"
and confirm to add info into Windows Registry

2.5. Run as Administrator "MultiKey_18.1.1_x64_24032019_testmode\install.cmd" and wait until
the end of setup

2.6. REBOOT computer!

NOTE: after reboot Windows has to start in test mode. If not- seach in internet what have
to be done to boot Windows on your computer in test mode

3. Enjoy


NOTE: If you want to use SolidCAM or Imachining for NX on the same computer with Mastercam 2020
run "MultiKey_18.1.1_x64_24032019_testmode\SolidCAM.reg" and repeate steps 2.5-2.6