LIBRA H6 & LIBRA CH Cabinet

Описание

LIBRA H6 is the latest development in the cabinet hangers program offered by Italiana Ferramenta.
The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet.
LIBRA is a very resistant and reliable solution as the zinc alloy body is sensibly thicker, and therefore stronger.
All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent.
LIBRA H6 is the left/right cabinet hanger with 2 semi-circular pins Ø15mm + pre-inserted screw for the top (if required).
It features an innovative locking device to the side panel conceived to sensibly increase the capacity loading of the cabinet.
The axial-locking of LIBRA H6 allows the fixing screw to penetrate the side panel beyond the back panel groove.
Also featured in the LIBRA family are 5 types of wall plates and 1 types of wall bars made of very thick zinc-coated steel and hardened by punched impressions.
Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment.
Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs.
LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient.
The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.

Steel, Zinc alloy and Engineering plastic according to related version.

PAT. PENDING

LIBRA CH is a hanging solution to be combined with a pair of standard cabinet hangers to be fixed to the side panels.
It is recommended for wall-mounted suspended cabinets with heavy loads or particularly deep drawers.
LIBRA CH can be fixed to the top panel and to the bottom panel.
LIBRA CH features a mechanical sledge, a sliding element that facilitates the vertical adjustment as well as the in-depth adjustment.
The smooth movement guaranteed by the mechanical sledge allows the hanging screw, to easily adapt to vertical adjustments of the side hangers.
The hanging screw is hooked on the bar and follows the horizontal adjustments.
LIBRA CH features the patented ANTI-TURNOVER device.

Benefits
- It is possible to use as many cabinet hangers as needed, in order to hold the required load as well as the cabinet shape.
- Several hanging points facilitate the even load distribution of the cabinet on the wall bar.
- The fixing to both the bottom and the top allows the hanging to be more rigid and avoids any structural failure, especially in case of swinging loads or when deep drawers are opened.
- A more structural solidity is guaranteed.

The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.

Steel, Aluminium, Zinc alloy and Engineering plastic according to related version.