Kenmore Elite Washer F35 SUD Error - Voltage Checks to Better Determine Cause

Описание

http://www.f35error.com – If you’re getting the F35 and SUD errors now here is a quick check to see if it is your CCU or analog pressure sensor, or APS. If your APS’s output is reading is low then I would repair or replace your APS. My failed W10415587 APS sensor was reading .161 VDC instead of .380 VDC and would cause the F35 and SUD errors. I am creating APS repair kits so you can fix your APS in 99% of cases. Check back soon…

If your CCU’s 5VDC rail reading is not stable or is -/+ 0.3 VDC then I would recommend the F35 error repair kit. Note: If your 5VDC rail is low then the output of the APS will be lower because the pressure sensor i.c.’s output is ratiometric.

If your CCU 5VDC rail reading is good then I would recommend proactively upgrading your grey CCU components to prevent future F35/ SUD errors. See http://www.f35error.com for kit.

I also provide bearing and seal kits for your washer for when it is sounding like a jet taking off. It is best to catch the bearing and tub seal failure early as possible. See http://www.washerbearings.com.

Don’t forget to subscribe and leave any questions below…

Thank you,

Jeff Hartman
“The Neptune Man”

P.S. Visit http://www.breakthroughwithjeff.com to experience a 14 day training on a work at home solution - no cost - This will change your life!