Johnson 70 HP lower unit oil

Описание

Quicksilver high performance 90SAE
Attwood lower unit pump
Large flathead screwdriver
Catch pan
Gloves
Rags

Unscrew vent screw on top followed by fill screw, one on the bottom.

Allow for oil to fully drain.

Replace washers as needed.

Attach pump to bottom hole, drain tube.

Begin to pump slowly to allow air to scape.

Once oil begins to weep from top hole, replace top screw, make sure it is snug to create a vacuum.

Remove pump attachment and quickly replace bottom screw, move quick for minimal oil loss.

Tighten both screws and wipe residue oil to avoid water contamination.

Go get some sun!