Evosta 2 -10- Troubleshooting

Описание

The Evosta 2 LED can show error codes.
2 Flashes – Trip
Engine control loss, could be caused by wrong parameters, rotor blocked, disconnected phase, disconnected engine. Check if the rotor can rotate freely, deblock manually if necessary.
3 Flashes – Short circuit
Short circuit on phases or between phase and earth. Power down, wait 30 seconds and power the circulator.
4 Flashes – Overrun
Software failure. Power down, wait 30 seconds and power the circulator.
5 Flashes – Safety
Module error, could be caused by an unexpected over current or other hardware fault of the electronic board. Wait for 30 minutes without switching off the circulator.

Do you want to know more about our new Evosta circulator?

Visit the website dedicated to the Evosta’s range, Evosta 2 is the first electronic circulator with IPX5 protection and EEI index of ≤ 0,18!

https://evosta.dabpumps.com/evosta-2/

DAB makes products capable of ensuring reliability and efficiency and to optimize energy consumption in residential building service, commercial building service, agricultural and irrigation application.

https://www.dabpumps.com

#DAB #DABPumps #Evosta #Evosta2 #HowTo #Troubleshooting