Thermaltake Core P6 Quick Build - A Classic Open-Air Case

Описание

Here's a quick build on Thermaltake's Core P6 Snow Edition.

Here's the build specs:

Processor: Ryzen 7 5800x
Motherboard: Asus ROG Strix B550-A Gaming
Graphics Card: Asus ROG Strix 3070
Storage: Samsung 980 EVO M.2 500gb
Memory: Thermaltake ToughRAM 32gb x4
Power Supply: Thermaltake ToughPower Grand RGB 850w

Custom Loop:
CPU Waterblock: Thermaltake Pacific W7 Plus
GPU Waterblock: Thermaltake Pacific V-RTX 3070 Plus
Reservoir/Pump: Thermaltake Pacific DP100-D5 Plus
Fittings: Thermaltake C-Pro fittings (White)
Thermaltake Pacific G1/4 90 Degree Adapter
Radiator: Thermaltake Pacific CLM 360
Fans: Thermaltake Riing Quad 12


I used one of this to make sure the loop won't have any leaks once filled up:
Thermaltake Pacific Leak Tester


Build Notes:
The CPU waterblock (W7 Plus) had the "ring" custom painted white. If you are planning to do the same, "prying" out the ring around the waterblock was the only way that you can take it out. But I ended up breaking one of the tabs on it.

For the Reservoir/Pump (DP100-D5), the mounting brackets were painted white. Can be easily removed with a few screws. Same with the pump housing and the aluminum pump bracket.

For the PSU cover, if you want to make your own custom cover, all I did was took out the PSU shroud with just a few screws (I think it was only being held with 5-6 screws that is easily accessible), and basically traced the outline of the side of the shroud were the cover will go on a piece of acrylic sheet taped with Painter's tape. Scoring knife will do the job for cutting.

A huge shoutout again to Thermaltake for sponsoring this build!





Music:
Song: Happy Accidents
Artist: Inukshuk

https://www.youtube.com/watch?v=R63M51SZAnw